Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Oreland
If your chimney is pulling smoke into the room on the first cold night, or you’ve noticed crumbled mortar on the roof, you’re in the right place. We handle chimney repair in Oreland for the ranches, splits, and colonials that make up most of this borough, and we do it with camera evidence you can see before anyone recommends a thing. One call brings a technician who can sweep, inspect, repoint, and reline – not a handyman who stops where the real work starts. Call (855) 528-0951. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Oreland Homeowners Call Chimney Sweep Somerton for Chimney Repair
Oreland is a small, heavily residential borough, and chimney work here has a rhythm you notice once you’ve worked these blocks. The calendar fills with repeat customers on the same few streets, because a chimney that gets looked after properly gets looked after again two or three seasons later. That’s the kind of relationship we aim for, and it’s why so many Oreland homeowners keep our number on the fridge.
We handle the whole chimney, not just the sweep. Cap and crown, liner and rebuild, flashing and fireplace repair all sit under the same roof, so you’re not passed to a second contractor halfway through a job. Our technicians have up to 8 years of experience, and they work with professional-grade materials from brands most homeowners never hear of until they need them.
When you call, you’ll get a straight answer about what we found and what it means for your home’s safety. If a repair can safely wait until spring, we’ll say so. If it can’t, we’ll show you why on camera. That’s the whole approach. We’d rather earn a second call than sell you work your chimney doesn’t need.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Oreland
Most of what we do in Oreland comes down to water, mortar, and draft – the three things that wear on a masonry chimney in southeastern Pennsylvania. Here’s how each service plays out.
Mortar Repointing in Oreland
Repointing means grinding out the old, crumbly mortar between the bricks and packing fresh mortar back in so the joints hold tight again. On the post-war ranches and splits around Oreland, the mortar in exterior chimneys takes a beating from freeze-thaw cycles, and the joints above the roofline often go first. Repointing before the bricks themselves start to spall is the difference between a repair and a rebuild.

Spalling Brick Repair in Oreland
Spalling is when the face of a brick flakes off or the brick crumbles from the inside out, usually because moisture got in and froze. We replace the damaged bricks and address the source of the water, not just the symptom. Left alone, spalling spreads to neighboring bricks and weakens the whole stack.

Chimney Waterproofing in Oreland
Waterproofing is a breathable sealant applied to the masonry that keeps rain out while letting moisture vapor escape. It’s the quiet work that prevents most of the repairs above from coming back. For Oreland chimneys with older clay-tile flues, waterproofing the exterior paired with a proper cap closes the two biggest doors water uses to get in.

Flashing Repair in Oreland
Flashing is the metal that seals the joint where the chimney meets the roof, and it’s the most common source of leaks we find in Oreland. Original flashing from the 1950s through the 1970s is often rusted, pulled loose, or tarred over instead of properly replaced. We fix the flashing so rain runs off the roof the way it’s supposed to, and so the wood around the chimney stays dry.
Chimney Rebuilding and Tuckpointing
When enough of the stack is failing, a partial or full rebuild is the honest answer, and tuckpointing the upper courses is the smaller repair when the damage is contained. Our chimney repair team can rebuild from the roofline up or address just the failing section, matching the existing brick as closely as the material allows.
The Oreland Chimney Problem Nobody Warns You About
Here’s the pattern that shows up again and again on the older ranch blocks off Oreland Mill Road, and it’s worth explaining plainly. A homeowner replaces an open wood fire with a gas log set or an insert. The chimney gets a modern appliance but keeps its original clay-tile flue, which was sized for a wood fire and never relined for the new venting. The first cold snap arrives, someone lights the fire, and smoke rolls into the living room. Everyone assumes the chimney just needs cleaning. It usually doesn’t – it’s a draft problem, and cleaning won’t fix a flue that’s the wrong size for what’s now attached to it. That’s why we start with a camera and draft check before we recommend anything, and why a smoky first fire should trigger an inspection, not just a sweep.
Trusted Brands We Service in Oreland
We install and work with professional-grade chimney components: DuraFlex flexible stainless liners for offset and complex flues, HeatShield for restoring deteriorating flue interiors without a full teardown, and Gelco caps that are purpose-engineered for the job rather than a hardware-store cover. These are the same brands commercial and specialty chimney contractors rely on, and they hold up to the freeze-thaw swings this part of Pennsylvania throws at a chimney. If your existing system uses Olympia Chimney components, we can work with those too. We don’t claim to keep parts on a truck or in a warehouse – we spec the right component for your flue and get it in, so the turnaround stays quick and the fit is correct.
Common Chimney Repair Problems We See in Oreland Homes
- Cracked and spalled clay-tile liners. Freeze-thaw cycles open hairline cracks in the flue tiles, and once they’re open, creosote and moisture work their way into the masonry behind them. A camera inspection is the only reliable way to see how far the damage has gone.
- Deteriorated mortar crowns and flashing. The crown at the top of the stack and the flashing at the roofline are the two spots water gets in first on Oreland’s mid-century chimneys. Rusted dampers and stained smoke chambers are usually the evidence of a leak that started up there.
- Undersized flues after a gas conversion. When a wood fireplace gets a gas log set or insert without a properly sized stainless liner, the result is poor draft and a fast buildup of first-degree creosote that brushes off easily but signals a venting problem underneath.
- Original fireplace boxes with no liner at all. Some older Oreland homes still have unlined flues, which is a real safety concern for anyone burning wood. That’s a case for a proper reline, and it’s exactly where visible evidence matters most.
See the difference
Before
After
Before
After
Before
AfterHow a Chimney Repair Visit Usually Goes in Oreland
In the borough’s mid-century ranches and splits, a common repair scenario starts with a cold exterior chimney that drafts poorly after a gas log set was installed without the right stainless liner. A qualified local pro typically begins with a Level 1 or Level 2 inspection, running a camera up the flue to check for gaps, spalling, or creosote glaze, and only then recommends relining with something like HeatShield or DuraFlex when the footage shows the need. The homeowner watches the screen and sees the same thing the technician sees. That’s the standard we hold to, because this is where the trade’s worst upselling happens – vague warnings about “the liner” with nothing to back them up. Nothing gets recommended here without camera evidence you can look at yourself, and we’ll tell you plainly when a repair can safely wait.
Pricing for Chimney Repair in Oreland, PA
Pricing for chimney repair in Oreland is set per job by a written estimate, and the ranges below reflect what this kind of work typically runs in the local market. A typical mortar repointing of the chimney above the roofline runs $600-$1,500. Flashing repair usually runs $300-$700, and chimney waterproofing typically runs $250-$600. Spalling brick repair on a section of the stack commonly falls in the $500-$1,200 range, and a partial chimney rebuild runs $2,500-$6,000 depending on how much of the stack is failing. A flue reline, when the camera shows it’s needed, typically runs $2,000-$5,000. What moves the number is access, how much of the stack is affected, and whether the work is masonry-only or includes venting. The written estimate sets the final price, and the estimate itself is free.
We Also Serve Cities Near Oreland
We work across the communities around Oreland as well, including Horsham, Lower Moreland, Bustleton, and Northeast Philadelphia. The housing stock shifts block by block between these towns, but the chimney problems rhyme: water in the masonry, tired mortar, and draft issues after a fireplace upgrade. If you’re just over the borough line, we can still help. Learn more about how we serve Oreland and the surrounding area.
Serving Oreland, PA – Our Local Coverage Area
We serve Oreland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Oreland
Your gas log set is venting into a flue that was sized for a wood fire, not a gas appliance, so the chimney can’t pull enough draft to carry the smoke out, especially while the exterior stack is still cold. That’s a venting problem, not a cleaning problem, and it usually points to a properly sized stainless liner. Call (855) 528-0951 for an exact quote – estimates are free.
You can’t tell from the firebox or the roofline – it takes a camera run up the flue to see cracks, spalling, or gaps in the clay tiles. A cleaning only removes what’s on the surface; a camera inspection shows what’s underneath. We’ll walk you through the footage on site so you’re not guessing. Call (855) 528-0951 for an exact quote – estimates are free.
The freeze-thaw cycles here stress the mortar joints and the flashing at the roofline more than most homeowners expect, and the original materials on 1950s-to-1970s exterior chimneys are often past their working life. Repointing and flashing repair stop water at the source before it reaches the damper and smoke chamber. Call (855) 528-0951 for an exact quote – estimates are free.
A Level 2 inspection includes a camera scan of the flue, a check of all accessible parts of the chimney and venting system, and a look at connections, clearances, and the condition of the liner. It’s the inspection you want after a gas conversion or before buying an older Oreland home. You’ll see the footage and photos yourself. Call (855) 528-0951 for an exact quote – estimates are free.
Third-degree creosote is a hard, glazed layer that brushing won’t remove, and it’s less common in Oreland than first-degree buildup because many fireplaces here have been converted to gas. When a glazed layer does show up, it takes professional removal, not a brush. A camera inspection confirms exactly what’s there. Call (855) 528-0951 for an exact quote – estimates are free.
Get a Straight Answer on Your Oreland Chimney
If something about your chimney doesn’t add up – a smoky fire, a dark stain on the ceiling, a vague warning from someone else’s inspection – call us and we’ll look at it properly. We’ll show you what’s happening on camera, tell you what it means for your home’s safety, and give you a written estimate before any work starts. Call (855) 528-0951. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Somerton.