Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Feasterville
If your chimney crown is cracking or your flue mouth sits wide open, we can help. We install, replace, and repair chimney caps and crowns for homeowners throughout Feasterville, and we know how the housing here divides: post-war ranches with original masonry stacks on the older streets, newer prefab flues near Street Road and Bustleton Pike. Fast dispatch, 7am-7pm, Sunday through Friday. Call (855) 528-0951 and we’ll set up a free estimate.
Why Feasterville Homeowners Call Chimney Sweep Somerton for Chimney Cap & Crown
Feasterville homeowners call us because we handle the whole chimney, not just the sweep. Cap and crown work closes the loop on a chimney we’ve already looked at from the inside, and we’d rather fix what we find than hand you a warning and a phone number for someone else.
Our technicians have up to 8 years of experience, and they work with the same professional-grade materials used on commercial and specialty chimney jobs: Gelco and Famco caps, copper and stainless options, HeatShield for flue restoration when the crown problem has let water into the tile below. We install caps that are purpose-engineered chimney components, not hardware-store covers that rust out in a few seasons.
Response time to Feasterville is quick. We dispatch from 7am to 7pm, Sunday through Friday, and our phones are answered 24/7, so a call outside those hours gets booked into the next opening rather than lost. When we come out, you get a written estimate before any work begins, and nothing is recommended that we can’t show you with photos or camera evidence.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Feasterville
We cover the full range of cap and crown work on both masonry and prefab chimneys. Here’s what each job involves and where it fits in Feasterville.
Cap Installation
A properly sized cap keeps rain, birds, and squirrels out of the flue while letting smoke escape. On the older exterior masonry stacks common in Feasterville, installation often means fitting a cap where none ever existed, which is a corrective job rather than a decorative one. We size the cap to the flue liner, not to whatever’s on the shelf.

Cap Replacement
Old caps rust through, warp, or get knocked loose by winter wind, and a loose cap is worse than no cap because it can block the flue. We pull the failing unit, check the flue mouth and crown while we’re up there, and fit a replacement that matches the chimney type. For stainless-lined flues, that usually means a factory-matched cap; for masonry stacks, a Gelco or Famco cap built for the job.

Crown Repair
The crown is the mortar cap on top of the stack, and it takes the worst of Feasterville’s freeze-thaw cycles. When it cracks, water runs down behind the flashing and into the masonry. We repair or rebuild crowns with a proper overhang and slope so water sheds away from the flue instead of into it. A crown repair often comes up during the same visit as a cap, since both live at the top of the stack.

Crown Coating
When a crown is cracked but still structurally sound, a flexible coating can seal it without a full rebuild. It’s a cost-saving option that makes sense on crowns with hairline cracks rather than deep breaks or crumbling mortar. We’ll tell you plainly which one your crown needs, and we won’t push a rebuild when a coating will hold.
Trusted Brands We Service in Feasterville
We work with Olympia Chimney, Famco, Copperfield, and DuraFlex, brands most homeowners never encounter until something fails. These are the components commercial and specialty chimney contractors specify, and they hold up better than generic covers. We don’t stock parts on a truck, so we measure and order what fits your flue, which keeps the turnaround tight without cutting corners on sizing. If your flue needs a flexible stainless liner before a cap can go on, DuraFlex handles the offset and complex runs that rigid liners can’t, so you’re not sent looking for a second contractor.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Feasterville Homes
- No cap at all on older exterior stacks. Around the older streets near the Feasterville-Trevose line, techs routinely find exterior masonry chimneys that were built without a cap at all, letting rain and insects into the flue. The clay tile below the cap line usually shows spalling as a result, and a cap is the first fix before anything else.
- Overhanging mortar crowns cracked by freeze-thaw. Feasterville’s humid winters crack crowns and mortar, and once water gets behind the flashing it works into the masonry below. Crown repair or coating is the fix, and it’s cheaper than the rebuild that follows if you wait.
- Glazed creosote cutting draft before the crown even shows a problem. Damp shoulder-season burning glazes creosote on the cap screen and damper area, and the draft drops before anyone notices the crown. Homes burning through those wet spring and fall weeks build stage-2 or stage-3 creosote faster than a drier climate would.
- Prefab flues with mismatched or missing caps. In the newer subdivisions near Street Road and Bustleton Pike, factory-built fireplaces and metal liners need a factory-matched or custom cap, not a masonry-style one. A generic cap on a stainless flue leaks at the seam and lets water into the liner.
Pricing for Chimney Cap & Crown in Feasterville, PA
A typical cap installation in Feasterville runs $250 – $550, and a crown repair or rebuild runs $350 – $850 depending on the size of the stack and how much mortar has failed. Crown coating on a structurally sound crown runs $200 – $400. A custom or multi-flue cap for a prefab or stainless-lined flue near Street Road or Bustleton Pike runs higher, usually $450 – $900, because the cap has to be sized and matched to the liner rather than pulled from a standard size. Prices are estimates, and the written estimate sets the final price. Nothing is recommended without camera photos you can see for yourself, and if a crown can safely wait a season, we’ll say so. Call (855) 528-0951 for an exact quote; estimates are free.
We Also Serve Cities Near Feasterville
The same cap and crown work we do in Feasterville covers the surrounding towns: Churchville, Somerton, Lower Moreland, and Richboro. The housing stock and the freeze-thaw cycles are similar, so the advice carries over. If you’re just outside the Feasterville line, call and we’ll confirm coverage. You can also read more about our chimney cap & crown service and our Feasterville service area.
Serving Feasterville, PA – Our Local Coverage Area
We serve Feasterville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Feasterville
Because they were built without one. The post-war ranches and split-levels in 19053 went up before caps became standard practice, so the flue mouth sat open to rain and insects for years. That makes cap work here corrective rather than cosmetic: a cap job on one of those stacks is often the first time the flue is looked at from the top down. Call (855) 528-0951 for a free estimate.
Yes. When a wood stove is the primary heat source, creosote loads far heavier and glazes faster, so the safe sweeping interval shortens and the cap screen needs checking more often. A cap can’t protect a flue that’s already glazed, so the sweep comes first and the cap goes back on after. Call (855) 528-0951 to book a sweep and cap inspection in one visit.
It’s a masonry problem that a cap alone won’t fix. The crown is the mortar cap on top of the stack, and a crack means water is getting behind the flashing and into the tile below. Crown repair or coating addresses that directly; a cap protects the flue mouth but won’t seal a cracked crown. Call (855) 528-0951 for an inspection that tells you which you’re dealing with.
Yes. Prefab and stainless-lined flues near Street Road and Bustleton Pike take a factory-matched or custom cap rather than a masonry-style one, and a multi-flue cap works well on shared stacks. We measure the flue and order the cap to fit, using Famco or Olympia Chimney components. Call (855) 528-0951 and we’ll size it from the top down.
You need a Level 2 inspection if there’s been a chimney fire, a change in fuel type or appliance, a new home purchase, or visible cracking around the crown or flashing. It covers the flue interior with a camera, which a basic sweep doesn’t. Call (855) 528-0951 and we’ll tell you which level your chimney needs before any cap goes on.
If your chimney crown is cracked, your cap is missing or failing, or you’re not sure what’s up on the stack, call us. We’ll look at the whole system, show you what we find, and quote the repair in writing before we start. Call (855) 528-0951 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Somerton.