Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Liner & Rebuild for Somerton Homeowners
If your flue is cracked, unlined, or lined with clay tile that’s spalling, a rebuild or reline isn’t cosmetic work. It’s what keeps combustion gases inside the chimney and out of your living room. Somerton has plenty of older homes where the original flue has been patched, painted over, or never updated for the appliance now connected to it, and that’s exactly the kind of job we handle from start to finish.
Our technicians have up to 8 years of experience, and we work with professional-grade liner systems like DuraFlex and HeatShield rather than the generic kits sold at big-box stores. We handle the whole chimney, not just the sweep, so a liner problem doesn’t turn into a second-contractor search. Call Chimney Sweep Somerton at (855) 528-0951 for a free estimate.
What Our Chimney Liner & Rebuild Service Includes
Every job starts with a camera inspection of the flue so we can show you what’s actually happening inside the chimney. From there, the right fix depends on the condition of the flue walls, the appliance you’re venting, and how much of the structure has to come apart.
Stainless Steel Liner
A stainless steel liner is a rigid or semi-rigid pipe inserted into the flue to create a sealed, corrosion-resistant passage for smoke and gases. You need one when the original clay tile is cracked, missing joints, or was never sized for the appliance you’re running. We size the liner to the appliance and insulate it where code or performance calls for it, using systems like DuraFlex that hold up to the heat cycling a wood-burning fireplace puts on metal.
Flexible Liner
A flexible liner is the same stainless steel construction, but it bends, which matters in Somerton’s older homes where flues often have offsets or were built with a jog around a framing member. Rigid-liner-only crews decline these jobs; we don’t, because flexible systems like DuraFlex can navigate an offset flue without cutting into the chimney. If your flue has a bend you can’t see from the roof, that’s usually where a flex liner earns its keep.
Liner Replacement
Liner replacement means removing a failed liner and installing a new one in the same chase. You need it when the existing liner is cracked through, has separated joints, or has been damaged by a previous chimney fire that nobody addressed. We pull the old liner, inspect and clean the flue walls, and install a new system matched to the appliance, then document the finished liner with photos so you have a record of what’s behind the brick.
Partial Rebuild
A partial rebuild addresses the damaged section of a chimney rather than the whole structure: the crown, the top courses of brick, a spalled section above the roofline, or a compromised smoke chamber. You need one when the damage is localized and the lower flue is still sound. We use HeatShield to restore deteriorating flue interiors where a full teardown isn’t warranted, which keeps the cost down and the disruption to your home minimal.
Full Chimney Rebuild
A full rebuild takes the chimney down to a stable point and rebuilds it, brick by brick, with a new crown on top. You need one when the structure has leaned, lost mortar throughout, or been condemned by an inspector. This is one of the most technically demanding jobs in the trade, and it’s why we handle the mason work, the flue, and the cap in one scope instead of handing you off to three contractors.
Liner Repair
Liner repair fixes a specific defect in an otherwise serviceable liner: a crack at a joint, a gap at the top plate, a section of HeatShield that needs reapplication, or a damaged connector. You need it when the liner is mostly sound but has one weak point the camera can find. We repair what can be repaired and tell you plainly when a full reline is the better use of your money.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Liner & Rebuild
DuraFlex is one of the flexible stainless systems we install most often, and we know its fittings, its insulation wraps, and where the connections are most likely to fail over time. HeatShield is the ceramic-based resurfacing product we use to restore a deteriorating flue interior without demolishing the chimney, and we’re certified to apply it. Olympia Chimney components show up in the caps and liner terminations we work with, and we know how those parts weather in this climate and where they tend to loosen.
Famco and Copperfield are the names behind the purpose-engineered caps and crowns we install, and they’re built for the job in a way a hardware-store cover simply isn’t. Copperfield’s copper work in particular is worth knowing if you’re replacing a cap that’s failed more than once.
Whether you have DuraFlex, HeatShield, Olympia Chimney, Famco, Copperfield, or any other make, we can help. If your system is a brand we don’t carry, bring the model information and we’ll tell you what we can service and what has to be replaced.
Signs You Need Chimney Liner & Rebuild Right Now
- You smell smoke inside the house when the fireplace is running. Smoke backing into the room usually points to a flue that’s too small, blocked, or unlined, and it means combustion gases aren’t leaving the way they should. A camera inspection tells you which of those it is within minutes.
- Flue tiles are cracked, spalling, or missing at the joints. Cracked tile is the single most common reason we recommend a stainless liner. Gaps between tiles let heat and gases reach the framing, and no amount of sweeping fixes that.
- There’s visible damage to the exterior brick or crown. Spalled brick, crumbling mortar, and a cracked crown all let water into the chimney. Once water is inside, freeze-thaw cycles in Somerton winters push the damage deeper each year.
- Your appliance was replaced but the flue wasn’t. A new insert or gas appliance connected to an old, oversized, or unlined flue is a common mismatch we find. Liners are sized to the appliance, and the wrong size causes drafting problems and creosote buildup.
- An inspector flagged the chimney but didn’t explain it. If you’ve received a vague warning about your liner and no one has shown you the evidence, call us. We inspect with a camera and show you the photos before recommending any work.
Our Chimney Liner & Rebuild Process – Step by Step
- 1
Inspection and camera scan. We start inside the firebox and scan the full height of the flue with a chimney camera. You see the same images we do, in real time, and we point out what’s normal wear and what’s a genuine defect.
- 2
Written findings and a flat-price estimate. Before anything gets booked, you get a written scope with the height, the appliance, the liner type, and the total price agreed up front. No surprise line items once the chimney is open.
- 3
Prep and protection. We lay drop cloths, seal off the work area, and stage materials so the rest of the house stays clean. Masonry dust travels, and we treat containment as part of the job rather than an afterthought.
- 4
The liner or rebuild work. Depending on the scope, this means pulling the old liner and installing a new stainless system, applying HeatShield to restore the flue interior, or taking down and rebuilding damaged masonry. Each stage gets documented with photos as it’s finished.
- 5
Final test and photo report. We test the draft, check the connections, and confirm the appliance vents correctly before we call the job finished. You receive a photo report showing the completed liner or rebuild, so you have a record for your insurance company or for the next owner of the house.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Somerton?
Typical pricing in Somerton for a stainless steel liner runs $2,400 – $4,800 depending on flue height, liner diameter, whether the flue needs insulation, and how complicated the access is at the top. A flexible liner in an offset flue usually sits in the same range, sometimes toward the higher end because the install takes longer. Liner repair, where a single joint or termination needs attention, typically runs $400 – $1,200.
HeatShield restoration, which rebuilds the flue interior without a teardown, generally lands between $1,800 – $3,500 depending on how much of the flue needs resurfacing. A partial rebuild at the crown or roofline usually runs $1,200 – $3,000, while a full chimney rebuild typically starts around $6,000 and climbs with height, brick condition, and how much of the original structure can be salvaged.
What moves the number: chimney height, flue size, whether a chase cover or cap has to be replaced, the condition of the crown, and how accessible the roof is. What’s included in our estimate: the inspection findings, the liner or masonry materials, containment, and the final photo report. The written estimate sets the final price. Call chimney liner & rebuild at (855) 528-0951 for an exact quote, and the estimate is free.
Chimney Liner & Rebuild Near Somerton – Our Service Area
We handle liner and rebuild work throughout Somerton and the surrounding towns, including Woodbourne, Warwick, Churchville, Richboro, Horsham, Oreland, and Newtown. Most jobs in Somerton proper get scheduled within a few days of the estimate, and the surrounding towns typically follow the same pattern. If you’re in Bristol, Levittown, Fairless Hills, or Croydon, we cover those too; reach us through our chimney liner & rebuild team and we’ll confirm scheduling. Call (855) 528-0951. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Somerton, PA – Our Local Coverage Area
We serve Somerton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Liner & Rebuild in Somerton
A chimney liner is the metal or ceramic passage inside your chimney that carries smoke and gases safely to the outside. A rebuild is the masonry work that restores the chimney structure itself, from a partial crown repair to a full tear-down and reconstruction. Most jobs we see need one, not both, and the camera inspection is what tells you which. Call (855) 528-0951 if you’re not sure what you need; estimates are free.
A standard stainless liner install usually takes one full day, and a flexible liner in an offset flue can run into a second day. HeatShield restoration takes one to two days depending on how much of the flue is being resurfaced, and a full rebuild is a multi-day project that depends on weather and the extent of the masonry damage. We give you the expected timeline in writing with the estimate. Call (855) 528-0951 to book an inspection.
Stainless liners typically run $2,400 – $4,800 in Somerton, HeatShield restoration runs $1,800 – $3,500, and a full rebuild starts around $6,000. The variables that matter most are flue height, liner diameter, and how much masonry is actually damaged. The written estimate sets the final price, and there’s no cost for the estimate itself. Call (855) 528-0951 for an exact quote; estimates are free.
Yes. We install DuraFlex liner systems and we’re certified to apply HeatShield. We also work with Olympia Chimney and Famco components, and we service systems regardless of brand. If you’re unsure what’s in your flue, the camera scan identifies it. Call (855) 528-0951 and we’ll confirm what your system needs.
Same-day dispatch is sometimes possible when the schedule allows, and we’ll tell you honestly at the time you call. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday; to see the chimney liner & rebuild availability for your area, call (855) 528-0951. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.
Liner and rebuild work carries the manufacturer’s warranty on the materials plus the workmanship terms stated in your written estimate. We put those terms in writing before the job is booked so you know exactly what’s covered. If a liner or termination needs attention afterward, call (855) 528-0951 and we’ll come evaluate it.
Clear the firebox, move any furniture or rugs away from the hearth, and give us a clear path to the roof access point if you can. Secure pets in another room while we’re working, since masonry dust travels more than people expect. We handle the drop cloths and containment. If anything about access is unusual, tell us when you book at (855) 528-0951.
Schedule Your Chimney Liner & Rebuild Service in Somerton Today
A liner that’s cracked or missing isn’t something to wait on, and a chimney that’s failing at the crown only gets more expensive each season. Call Chimney Sweep Somerton at (855) 528-0951 to schedule an inspection and free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll see the camera evidence before anyone recommends work, and the written estimate sets the price.
Written by the team at Chimney Sweep Somerton.