Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Horsham
If your Horsham home was built between the 1950s and 1970s, your chimney has probably been through more freeze-thaw cycles than you’ve had birthdays. We’re Chimney Sweep Somerton, and we handle the whole chimney, not just the sweep: cap installation, cap replacement, crown repair, crown coating, multi-flue caps, and custom caps. Most Horsham ranches and split-levels have their masonry chimney on the far gable end, out of sight from the ground, so small crown problems stay small until a heavy rain finds them. Call us at (855) 528-0951 for a free estimate on any cap or crown work in Horsham.
Why Horsham Homeowners Call Chimney Sweep Somerton for Chimney Cap & Crown
Horsham’s housing stock is dominated by 1950s-70s ranches, split-levels, and a handful of colonials on generous lots, with a fireplace in nearly every one. That means the cap and crown work we do here is almost always on an original clay-tile-lined masonry chimney, not a newer prefab system. We know the difference, and we bring it up before we quote.
We installed chimney caps and crowns as part of our full chimney scope, and we use professional-grade parts from Gelco and Famco, not generic hardware-store covers. When a crown has spalled or a cap has pulled away from the flue tile, we rebuild and coat the crown or set a properly sized multi-flue cap in the same visit. Our technicians have up to 8 years of experience working on this age of chimney, and they can tell you plainly whether a crown needs a full rebuild or just a coat of sealant. We don’t stock parts on a truck; we order exactly what your chimney needs so the fit is right.
Horsham’s mature tree canopy is heavy, and leaf-fall clogs spark arrestors and cap screens fast through the fall. We’re familiar with the pattern of calls that come in October and November, and we’ll book you in with an honest estimate before the leaves turn. Reach a real person at (855) 528-0951. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Horsham
Here’s what a typical cap or crown job on a Horsham chimney involves, and why each service matters for the mid-century masonry flues we see across 19044.
Cap Installation
A chimney cap keeps rain, leaves, and animals out of the flue. On a Horsham ranch, the chimney is often on the far gable end and out of sight, so a missing or loose cap goes unnoticed until water lands in the firebox. We install a properly sized cap matched to your flue opening and crown dimension, whether that’s a single-flue cap or something larger for the wider chimneys found on some split-levels. Cap installation in Horsham typically runs $180 to $450, depending on the cap type and roof access.

Cap Replacement
Horsham’s autumn leaf drop clogs cap screens and spark arrestors fast. A cap that was sized for a wood-burning flue no longer fits if your fireplace was converted to a gas insert or wood stove that added its own liner, leaving gaps for water and animals. We replace damaged or undersized caps and re-seal them to the crown so the fit is tight. A typical cap replacement in Horsham runs $200 to $500.

Crown Repair
The cast crown on a 1960s Horsham chimney is the water-shedding layer at the top. It cracks and spalls at the flue tile, and rain runs straight down the clay-tile liner. Since the chimney sits on the gable end rather than the main roof plane, that damage is rarely seen from the ground. We rebuild cracked crowns and re-form the slope so water runs off correctly. Crown repair in Horsham usually ranges from $350 to $900 depending on size and access.

Crown Coating
When a crown is sound but starting to weather, a coating seals the surface before freeze-thaw opens it further. We use professional-grade coating material, not paint, and we prep the surface first so it bonds. Crown coating in Horsham typically runs $250 to $500. If the crown is already crumbled, coatings won’t hold; we’ll tell you.
Trusted Brands We Service in Horsham
We work with professional-grade brands that most homeowners never encounter: Olympia Chimney, Famco, Gelco, Copperfield, and DuraFlex. These are components engineered for real chimney systems, not big-box substitutes. When a Horsham homeowner needs a cap or crown rebuilt, we specify the part and order it to the chimney’s exact dimensions. That’s a little slower than grabbing a universal cap off the shelf, but the fit is right, and it lasts. We don’t claim to stock parts locally. We claim the right part, ordered for your chimney. One call, one crew, and the same specialists who sweep your flue can repair the crown it sits under.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Horsham Homes
- Spalled cast crowns at the flue tile. The original crown on a 1960s gable-end masonry chimney cracks after decades of freeze-thaw, and rain finds its way down the clay-tile flue liner. Homeowners usually discover this as a damp firebox after a heavy rain rather than by seeing the damage.
- Caps that no longer fit after a conversion. If a Horsham fireplace was converted to a gas insert or wood stove, the added liner often changes the flue opening size. A single-flue cap sized for the original wood-burning flue leaves gaps for water and animals.
- Clogged spark arrestors and cap screens. The mature tree canopy around Horsham dumps leaves through the fall, and screens clog fast. That chokes draft and pushes smoke back into the firebox until the cap screen is cleared.
- Washed-out mortar joints at the crown line. Humid summers followed by hard winters work on the mortar at the top of the chimney. When joints erode, the crown pulls back from the flue tile and water slips in.
Pricing for Chimney Cap & Crown in Horsham, PA
Cap and crown pricing depends on the chimney size, roof access, and how much rebuild work the crown needs. Here are the typical ranges for Horsham. A standard cap installation runs $180 to $450, and cap replacement ranges from $200 to $500. Crown coating is typically $250 to $500, while full crown repair or rebuild runs $350 to $900. A multi-flue cap or a custom cap runs $400 to $1,100 depending on the flue count. Custom caps in Horsham cost more than a stock cap because they’re built to the chimney’s exact dimensions. We don’t quote over the phone with a firm number before seeing the chimney, but the free estimate includes a written price that sets the final cost.
We Also Serve Cities Near Horsham
We handle chimney cap and crown work across the surrounding area, including Oreland, Warwick, Lower Moreland, and Churchville. If your chimney is in one of these towns, the same team and the same process apply. Our cap and crown work is part of our full chimney cap & crown service, and we’re happy to add it to a sweep if your chimney needs both.
Serving Horsham, PA – Our Local Coverage Area
We serve Horsham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Horsham
It depends on whether the crown is cracked through or just weathered on the surface. A crown that has spalled and pulled away from the flue tile needs a rebuild, not a coat. A crown that’s sound but chalky can be coated to seal it. We tell you which one you have after looking at it, and we don’t recommend a rebuild when a coat will do. Call (855) 528-0951 for a free estimate.
Often, yes. A gas insert or wood stove usually adds its own liner, which changes the flue opening size. A cap sized for the original wood-burning flue may no longer fit tightly, leaving gaps for water and animals. We size the new cap to the converted flue and seal it to the crown. Call for an estimate.
Heavy rain drives water sideways into a gap that a light shower never reaches. On a Horsham gable-end chimney, that gap is usually where the crown has pulled back from the flue tile or the flashing has washed out. A light shower doesn’t have the volume or wind to push water in. A Level 2 inspection finds the exact spot. Call (855) 528-0951 and we’ll set a time to look.
Once a year. Even a chimney that never sees a fire takes on water, and in Horsham that water plus freeze-thaw is what cracks crowns and mortar. An annual inspection catches the damage while it’s still a coating job rather than a rebuild. Nothing is recommended without camera evidence you can see for yourself.
There are three stages, and the glazed, hard stage is the one to act on. Stage 1 is light soot that sweeps off easily. Stage 2 is flaky and crusty, still sweepable. Stage 3 is glazed and tar-like, and it usually means the flue has been running cool or restricted. On a mid-century clay-tile liner, a glazed stage often pairs with a cracked crown or a missing cap letting rain in. A sweep tells you which stage you have, and whether the liner still holds. Call for an exact quote – estimates are free.
Ready to get your Horsham chimney capped or crowned? Call Chimney Sweep Somerton at (855) 528-0951 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We handle the whole chimney, not just the sweep, so the cap, crown, and liner all get looked at in one visit.
Written by the team at Chimney Sweep Somerton.