Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Richboro
If your chimney cap is loose, rusted through, or missing, or the mortar crown at the top of the chase is cracked and staining the brick below, we can help. We handle cap and crown work for homeowners across Richboro, from the tall exterior chases off Almshouse Road to the older farmhouse chimneys near the village core, and we treat the cap and crown as the first line of defense for the whole flue. Rain that gets past a bad crown doesn’t stay at the top. Call (855) 528-0951 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Why Richboro Homeowners Call Chimney Sweep Somerton for Chimney Cap & Crown
Richboro is a town of two chimney timelines, and we know both. The newer cul-de-sacs off Almshouse Road are lined with tall exterior masonry chases that take the full force of southeastern PA weather, while the late-1800s farmhouses around Second Street Pike still carry hand-built, mortar-parged flues in oversized fireboxes. A stock cap bought off a shelf rarely fits either one well.
That split is why our chimney cap & crown team starts with a careful look rather than a sales pitch. We’re equipped to size a custom cap to an irregular farmhouse opening and to recast a cracked crown on a modern chase in the same visit. Our technicians have up to 8 years of experience, and we work with professional-grade components from makers like Gelco and Famco instead of generic hardware-store covers. We can also work with your insurer when a leak has done damage inside the house.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Richboro
Cap and crown work is the part of chimney care most often skipped after a sweep, and it’s the part that protects everything underneath. We cover the whole job in-house, so the person who inspects your flue is the person who fixes what’s wrong at the top of it.
Cap Installation in Richboro
A properly fitted cap keeps rain, birds, and squirrels out of a flue while letting smoke and gases escape. On the newer colonials off Almshouse Road, that usually means a stainless cap sized to the tall exterior chase so wind-driven rain can’t enter past a loose edge. On an older farmhouse opening, it means measuring the actual flue rather than assuming a standard size.

Cap Replacement in Richboro
Most caps fail from rust at the seams or from a winter that worked them loose. If yours is rattling, bent, or letting water in, we pull it, check the flue top underneath, and fit a replacement that seats correctly on what’s actually there. We often move homeowners to a Gelco or Famco cap built for chimney service, not a generic cover.

Crown Repair in Richboro
The crown is the sloped mortar cap at the very top of the chimney, and it’s the first thing southeastern PA freeze-thaw cycles attack. A hairline crack in the crown lets water track down to the clay-tile liner and rust the damper below. We grind out the failed mortar and recast the crown with the proper slope and overhang so water sheds away from the flue instead of into it.

Crown Coating in Richboro
When a crown is sound but showing surface wear, a protective coating can extend its life before cracks open. It’s a sensible option for a chimney that’s otherwise in good shape, and we’ll tell you plainly when coating is enough and when a recast is the honest answer. Our HeatShield capability also lets us restore a deteriorating flue interior without a full teardown when the damage has already reached inside.
Trusted Brands We Service in Richboro
We work with professional-tier brands that most homeowners never encounter, which matters when the job calls for a custom fit. That includes Gelco and Famco caps engineered for chimney service, Olympia Chimney components, and DuraFlex liner systems for complex or offset flues. We don’t claim to stock parts locally; we specify the right component for your chimney and get it fitted. What you get is a cap and crown built for the job, not adapted from a big-box substitute.
Common Chimney Cap & Crown Problems We See in Richboro Homes
Richboro’s climate and housing stock create a predictable set of cap and crown failures. Here’s what we run into most.
- Cracked mortar crowns on tall exterior chases. Freeze-thaw winters open hairlines in the crown, and by the next heating season water has reached the clay-tile liner and rusted the damper. It happens on chases that see little fire time, because nobody’s looking up there.
- Wind-driven rain past a loose or missing cap. On the newer cul-de-sacs off Almshouse Road, a missing cap lets rain erode the flue walls between rare winter fires, leaving long-idle open-hearth fireplaces damp and musty.
- Spalling liners and shedding mortar. Original clay-tile liners on 1970s through 2000s colonials break down over time, and a stock cap won’t seat on a broken flue top. That’s when a custom cap becomes the right call.
- Irregular openings on old farmhouse chimneys. The parged, unlined flues near the village core are hand-built and oversized, so a standard cap leaves gaps. A custom cap fitted to the actual opening closes them.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Richboro, PA
Cap and crown pricing in Richboro reflects the housing split here. A typical single-flue cap installation runs $250 to $550, and a multi-flue cap for a tall exterior chase usually runs $450 to $900 depending on the number of flues and the fit. Crown repair, where we grind out and recast failed mortar, typically runs $400 to $1,200, and a crown coating runs $250 to $500. Custom cap work on an irregular farmhouse opening runs higher because it’s built to measure, often $500 to $1,000. The written estimate sets the final price, and the estimate itself is free. We won’t recommend a recast or a custom build without showing you the cracked crown or the spalling brick so you can see it yourself.
We Also Serve Cities Near Richboro
We work throughout the area around Richboro, including Churchville, Newtown, Feasterville, and Woodbourne. The same freeze-thaw winters and humid summers that stress chimneys here reach every one of those towns, so the cap and crown advice carries over. If you’re nearby and not sure whether you’re in our range, call and we’ll tell you straight.
Serving Richboro, PA – Our Local Coverage Area
We serve Richboro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Richboro
Yes, it matters even if the fireplace sits idle most of the year. A cracked crown lets water into the flue whether or not there’s a fire, and that water rusts the damper and breaks down the clay-tile liner over time. The damage happens between fires, not during them. Call (855) 528-0951 and we’ll take a look and show you what the crown is doing.
We measure the actual opening and fit a cap to it rather than forcing a stock size, then check that the mortar parging inside is still intact. Those hand-built, oversized fireboxes near Second Street Pike don’t match modern dimensions, so a custom cap is usually the right answer. If the parging has failed, we’ll tell you what that means before recommending anything further.
A stainless multi-flue cap sized to the chase, with enough overhang to shed wind-driven rain away from every flue opening. The tall chases off Almshouse Road take weather from the side, so fit and overhang matter as much as the material. We’ll measure the flues and specify a cap built for that opening.
Yes, a wood stove that runs hard as a primary heat source builds creosote faster than an open fireplace used now and then, and that shortens the safe interval between sweeps. Burning seasoned wood and not damping the stove down for long smoldering burns both cut buildup. If you heat with wood through the winter, have the flue checked before the heating season starts, when September through December fills up.
Usually yes. When the crown itself has failed but the masonry below is sound, we grind out the bad mortar and recast the crown in place, which is far less than a rebuild. A rebuild only enters the picture when the brick and mortar underneath have broken down too. We’ll show you which situation you’re in before you commit to anything.
Get a Straight Answer on Your Cap and Crown
Whether you’re on a newer chase off Almshouse Road or an old farmhouse near the village core, the fix starts with someone looking at the top of your chimney and telling you what’s actually there. Our technicians have up to 8 years of experience, nothing gets recommended without evidence you can see, and we’ll say plainly when a job can safely wait. Call (855) 528-0951 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Somerton.