Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Warwick
If you live in Warwick – whether in the village core or out on the rural roads off the main township lanes – you already know your chimney takes a beating. Cold, wet winters and constant freeze-thaw cycling work away at masonry year after year, and a failing cap or crown is usually the first thing to show it. We handle chimney cap and crown work for Warwick homeowners as part of a full chimney scope: sweep, cap and crown, repair, liner and rebuild. Call (855) 528-0951 to book a free estimate.
Our technicians have up to 8 years of experience, and they know that Warwick chimneys are as much historic-preservation work as routine maintenance. That matters when the house is 200 years old.
Why Warwick Homeowners Call Chimney Sweep Somerton for Chimney Cap & Crown
Warwick isn’t a place where one approach fits every house. In the 18929 ZIP you’ll find the historic village core surrounded by township land, and the housing stock ranges from 18th and 19th-century stone farmhouses with original masonry chimneys to mid-to-late 20th-century colonials with prefab flues. We treat each one on its own terms, because the materials dictate the method.
The reason homeowners in Warwick call us back is that we can actually do the repair, not just flag it. A lot of chimney inspections end with a vague warning about the crown or cap and no path forward. We inspect, we explain in plain terms what we found, and the same team handles the fix. Cap and crown work is done in-house, which closes the gap that leaves a swept chimney still open to water intrusion and animal entry. We also use purpose-engineered components from brands like Gelco and Famco, not generic hardware-store covers that rust out in a couple of seasons.
Our technicians have up to 8 years of experience in this trade, and that experience shows most clearly on the old fieldstone chimneys around the village, where gentle methods matter more than horsepower.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Warwick
We cover the full range of cap and crown work, from a straightforward installation on a newer colonial to a preservation-minded repair on a stone farmhouse chimney that’s been leaking for a decade.
Cap Installation in Warwick
A properly sized, screened chimney cap is the single most effective defense against water, leaf debris and animals entering the flue. On Warwick’s rural properties, where leaf fall is heavy and wildlife has plenty of places to shelter, the screened sides of the cap do real work year-round. We fit caps sized to the actual flue opening, not a loose approximation.

Cap Replacement in Warwick
Rusted, bent or under-sized caps are common on older Warwick homes where a previous owner dropped in a cheap cover and never looked at it again. An under-sized cap lets debris through, which can turn light first-degree creosote into the glazed deposit a brush can’t remove. We pull the old cap, check the top of the flue while we’re there, and set a new one that fits.

Crown Repair in Warwick
The crown is the concrete or mortar cap at the very top of the chimney, and it’s where most water intrusion starts. Hairline cracks go unnoticed through the summer, then freeze-thaw cycling lets meltwater into the masonry and spalls the brick crown edge. On Warwick’s fieldstone chimneys this repair requires a mix compatible with soft lime mortar, and we handle that carefully – a topic we come back to below.

Crown Coating in Warwick
Where a crown is cracked but structurally sound, a flexible coating can seal it and buy years before a rebuild is needed. We’re honest about which situation you’re in. Coating is the right call on some Warwick chimneys and the wrong one on others, and if the crown is already sheared loose from the masonry below, coating it just hides the problem.
Trusted Brands We Service in Warwick
We work with professional-grade chimney components from Olympia Chimney, Famco and Copperfield, along with DuraFlex liner systems where a cap or crown job uncovers a flue that needs relining too. These are the same brands used by commercial and specialty chimney contractors, and they’re engineered for the job rather than adapted from general construction hardware. We don’t claim to stock parts locally or run a showroom in Warwick; we source what the job needs and turn the work around promptly. It means fewer return trips and a repair that holds through the next hard winter.
Common Chimney Cap & Crown Problems We See in Warwick Homes
- Hairline crown cracks that hide until winter. An original crown can look fine all summer and then spall at the edge after a few freeze-thaw cycles drive meltwater into the masonry. Southeastern Pennsylvania’s cold, variable winters make this the single most common crown failure we see around Warwick village.
- Hard modern cement patched over soft lime-mortar fieldstone. A prior crown patch done with Portland-cement mix over an old fieldstone chimney shears loose at the bond line and drops, leaving the flue top wide open to rain. This is a Warwick-specific hazard on the 18th and 19th-century stone farmhouses.
- Rusted or under-sized caps letting debris in. Fall leaf debris and animals find their way into an open or poorly screened flue, blocking draft and turning light creosote into a heavy glazed deposit a brush can’t touch. Heavy spring pollen and fall leaf drop make this worse on rural Warwick properties.
- Failed crowns on newer colonial flues too. The 1980s-and-later colonials elsewhere in the township aren’t immune; their crowns crack too, often from a different cause, and need a repair approach matched to modern masonry rather than old lime mortar.
Why old fieldstone chimneys around Warwick need a gentler hand
Here’s the piece most cap and crown pages skip. In Warwick’s 18929 ZIP, many chimney crowns sit atop 18th and 19th-century fieldstone farmhouse chimneys built with soft lime mortar. A crown that gets coated or rebuilt with a modern Portland-cement mix can crack the bond to the masonry below and shear off within a few freeze-thaw cycles. The same repair approach that works fine on a 1980s colonial flue a few miles away can be actively damaging here. Getting the mix right is preservation work, not just maintenance.
A common call on these farmhouses starts with a stain on the attic sheathing, or a chimney top visibly missing mortar between the brick courses after a winter of freeze-thaw. The original crown has spalled and cracked, water runs down the flue, and the draft falters on cold starts. Because these chimneys were built with soft lime mortar and unlined or clay-tile flues, a qualified local pro inspects gently (often a Level 2 inspection when a crown rebuild is on the table), rebuilds or coats the crown with a mix compatible with old masonry, sets a properly sized cap with screened sides, and checks the flashing and smoke chamber before calling it done.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Warwick, PA
Here are typical estimated ranges for cap and crown work in the Warwick market. The written estimate after we’ve seen the chimney sets the final price.
| Service | Typical estimated range |
|---|---|
| Standard chimney cap installation | $180 – $420 |
| Custom or multi-flue cap | $380 – $850 |
| Crown coating / sealing | $260 – $550 |
| Full crown repair or rebuild | $550 – $1,600 |
Custom and multi-flue caps sit at the higher end because they’re fabricated to fit, not pulled off a shelf. Crown rebuilds on old fieldstone run higher than on a modern flue because of the careful lime-mortar work involved. We book a sweep and give a flat price before we start. Call (855) 528-0951 for a free estimate.
We Also Serve Cities Near Warwick
We work across the surrounding area as well, including Richboro, Horsham, Churchville and Newtown. If you’re just outside Warwick, the same team that handles our chimney cap & crown work can look at your chimney. And if you’re in Warwick proper, you’re our focus on this page.
Serving Warwick, PA – Our Local Coverage Area
We serve Warwick and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Warwick
Yes, and it’s exactly the kind of work we specialize in. Old fieldstone chimneys built with soft lime mortar need a crown mix compatible with that masonry, and a cap sized to the actual flue opening; done right, both are entirely feasible on an unlined 18th or 19th-century chimney. What matters is using gentle methods rather than aggressive tools that damage the lime mortar. Call (855) 528-0951 for an exact quote – estimates are free.
A wood stove used as a primary heat source loads creosote much faster than a fireplace burned occasionally, so rural Warwick homes often need a sweep once a year or more, not the every-few-years a light user gets away with. Heavy burning builds a glazed deposit quickly, and that’s the point at which the cap and crown are worth a close look. Call (855) 528-0951 to book a sweep and inspection.
A screened, properly sized stainless or purpose-engineered cap is what works; a generic hardware-store cover often rusts out or fits loosely. On Warwick’s rural properties, heavy fall leaf drop and spring pollen clog an open or under-screened flue fast, so the screen sides matter as much as the top. Call (855) 528-0951 and we’ll size one to your flue.
Coating is right when the crown is cracked but still bonded to the masonry below; a full rebuild is needed when it’s already sheared loose or badly spalled. On soft lime-mortar fieldstone, the wrong choice – hard cement over soft mortar – can shear off within a few freeze-thaw cycles, so the inspection decides it. Call (855) 528-0951 for a free estimate and a straight answer.
Often it’s not the cap at all; a sticking damper and cold-start smoke usually point to a draft problem, a blocked flue or a failed smoke chamber, and a cap that’s under-sized or clogged makes it worse. The right move is a proper inspection rather than guessing. Call (855) 528-0951 – we answer 24/7 and can book a look at the whole flue system.
Book Your Warwick Chimney Cap & Crown Estimate Today
If your Warwick chimney crown is cracked, your cap is rusted or missing, or you’re not sure what’s letting water in, call us and we’ll take a look. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 528-0951 for a free estimate and a clear path forward.
Written by the team at Chimney Sweep Somerton.