Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Horsham, PA
We provide independent DuraFlex service across Horsham, PA, and what sets our work here apart is the housing itself: most of the chimneys we open up in this town are original mid-century masonry flues with a flexible stainless liner dropped inside, not the newer prefab systems you find further out. That combination – an aging clay-tile chimney wrapped around a DuraFlex liner – has its own set of failure points, and we know them by sight. Call (855) 528-0951 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Horsham Residents Choose Us for DuraFlex Service
DuraFlex is a flexible stainless steel chimney liner, and it’s a smart answer for the odd, offset flues that come with 1950s to 1970s construction. It bends where rigid pipe can’t. But flexibility has trade-offs, and we understand where DuraFlex installations tend to weaken over time: at the connector, at the joints, and around the insulation blanket.
We’re an independent shop. We’re not affiliated with DuraFlex, not a dealer, and not factory-authorized. What we bring is familiarity – we install, repair and service these systems with quality parts that fit them, and we’re not locked into any one manufacturer’s playbook. That means our recommendation for your Horsham chimney comes from what we actually see, not from what a sales program tells us to push. Our technicians have up to 8 years of experience, and we handle the whole chimney, not just the sweep.
Scheduling is straightforward. Call, tell us what the fireplace is doing, and we’ll book a visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Horsham
These are the issues we run into most often with DuraFlex liners in Horsham homes:
- Corrosion at the liner-to-appliance connector. When a wood fireplace has been converted to gas, the flue gases turn acidic, and that connector is where they attack first. Horsham’s humid summers accelerate it. A connector that’s quietly rusting can be passing moisture back into the masonry.
- Crushed or clogged insulation around the liner. Tight 1960s ranch flues leave little room, and the insulation blanket can compress or bunch up during installation or settle over the years. Draft drops, and smoke starts spilling into the room instead of going up.
- Cracked or separated liner joints from thermal cycling. Freeze-thaw winters work the stainless through hundreds of expansion and contraction cycles. Joints can separate. When they do, creosote builds behind the liner where a sweep can’t reach it, and hidden leaks follow.
- Top-plate and cap sealing failures. A failing top plate lets water run down the annulus between liner and flue, rusting the stainless from the outside in and spalling the crown around it. Water damage is often the real problem behind what looks like a draft complaint.
- Debris-packed caps and spark arrestors. Horsham’s mature tree canopy drops a heavy leaf load every autumn, and caps clog fast. A blocked cap backs smoke into the house on the first cold fire of the season.
DuraFlex Service in Horsham: What Local Conditions Mean for Your Equipment
Horsham built out largely in the 1950s through the 1970s, which means a lot of original masonry chimneys here sit on the far gable end of a ranch or split-level. That position puts them fully exposed to wind and weather on three sides, and decades of freeze-thaw have a way of finding every weak point. In 19044, we routinely find cracked crowns and washed-out mortar joints on those chimneys that stayed invisible until the first heavy rain sent water down the flue and into the firebox. For a DuraFlex owner, that water doesn’t just make a mess – it runs the outside of the liner, rusts the stainless, and rots the top-plate seal. A sweep that only brushes the flue and never looks at the crown isn’t doing you much good. We check the whole exterior assembly as part of the visit.
DuraFlex Models & Products We Service in Horsham
We service the flexible stainless liner systems that go into Horsham chimneys, including DuraFlex SW (Specialty Wall) liners, the DuraFlex Pro Flexible Liner, DuraFlex Insulated Flexible Liner, and the DuraFlex SmoothWall Liner. Each has different requirements for insulation, clearances and connection hardware, and getting those right is most of the job.
For critical connections and insulation, we use OEM DuraFlex components or equivalent UL-listed stainless parts. We don’t substitute cheap hardware that compromises performance or shortens the life of the system. When we quote a repair, we tell you which approach fits the condition we found, and why.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Horsham
Every job is different, so the price is set per job by the written estimate. What drives the number is the condition of the liner, how much debris has to come out, whether the cap and top plate need replacing, and how accessible the chimney is. A straightforward sweep and inspection costs far less than a connector rebuild or a top-plate replacement. The estimate itself is free, and we walk you through what we found with photos so you can see it yourself. Nothing gets recommended that the inspection doesn’t support, and we’ll tell you plainly when work can safely wait. Call (855) 528-0951 for an exact quote.
Serving Horsham, PA – Our Local Coverage Area
We serve Horsham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Horsham
Yes. Repeated freeze-thaw cycles stress the liner joints and the exterior masonry around them, so annual inspections matter more here than in a milder climate. Watch for water staining, spalling brick, or a crown that’s cracking along its mortar lines.
A Level 2 inspection is how you know. We run a camera through the flue, check the joints for separation, look for surface corrosion, and verify the top plate and cap are sealed. You get photos of what we found, not just a verbal warning.
Check the connector first. Gas conversion makes flue gases more acidic, and the connector at the appliance is where corrosion starts. Rust, white residue, or a loose fit there is worth a look before the next heating season.
Yes, and it’s one of the most common causes. Leaves and debris block the cap and spark arrestor, draft drops, and smoke backs into the room. Clearing the cap and checking the top plate usually solves it.
Minor connector issues can often be repaired. Surface corrosion or separated joints usually mean replacement. We make that call based on what the camera shows, and we’ll explain the reasoning. Call (855) 528-0951 for an exact quote – estimates are free.
Service Areas Near Horsham
We serve homeowners in Horsham and the surrounding communities, including Somerton, Woodbourne, Warwick, Churchville, and Richboro. If you’re nearby and not sure whether we cover your street, give us a call and we’ll confirm. We also handle DuraFlex work in Oreland for homeowners who want the same level of local familiarity with these liners.
Book Your DuraFlex Service in Horsham Today
Whether it’s a routine sweep, a Level 2 inspection, or a cap and crown repair, we handle the whole chimney system in one visit. Call (855) 528-0951 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Somerton.