Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Lower Moreland, PA
We provide independent Gelco service across Lower Moreland, from the Huntingdon Valley and Bryn Athyn side of the township to the postwar streets near the township line. What makes our Gelco work here different is a single fact: most Lower Moreland chimneys we open were built for something else, and their caps were fitted to a flue that no longer matches. Call (855) 528-0951. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Sweeping a Gelco-capped chimney is not just a brush down the flue. The cap is the first thing we look at, because on exterior brick and stone chimneys it’s also the first thing that fails.
Why Lower Moreland Residents Choose Us for Gelco Service
We’re an independent shop, which means we work on Gelco equipment without being tied to the manufacturer. No authorization, no dealer arrangement, no steering. If your cap has years left in it and only needs re-mounting, we’ll say so. If it’s undersized for a flue that was relined years ago, we’ll show you the gap and explain what water is doing behind it. That freedom is the whole point of hiring an independent.
Our technicians have up to 8 years of experience, and they’ve worked on Gelco caps across the multi-flue stainless, custom-fabricated and single-flue stainless range, plus the older galvanized slip-on models that still sit on plenty of township roofs. We know how those cap lines fit the brick-and-stone chimneys this town is built on. We also connect the whole system: sweep, cap, crown, liner, rebuild, fireplace repair. One call, one crew. If the sweep turns up a crown problem under the cap, that’s ours to handle too.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Lower Moreland
Gelco caps are decent equipment. The failures we find in Lower Moreland usually come from the chimney underneath them, not the cap itself.
- Corroded mesh and frozen hinge hardware. Exterior masonry chimneys here take repeated freeze-thaw cycles every winter. Stainless screen and hinge hardware corrode or freeze solid, the fine mesh clogs, and rain and downdrafts push straight into the flue. A simple re-mesh often fixes it.
- Caps sized for a single clay tile that no longer fits. This is the one we see most. Once a flue is relined with HeatShield or a stainless liner, the original Gelco cap’s footprint is too small. The gap invites water and animals; a properly sized replacement or adapter closes it.
- Loose mounting legs on original galvanized caps. Old screws pull out of brick crowns that have softened through damp winters. The cap lifts in wind, which is a leak, not just a rattle. Re-securing or re-mounting is straightforward work.
- No spark arrestor mesh on multi-flue chimneys. Caps installed without proper mesh let debris and moisture into old oil or coal flues that were later repurposed for wood or gas. We add the mesh and check the flue behind it.
- Caps that hide crown and mortar deterioration. A cap only seals if the crown under it is sound. Wet springs eat mortar joints, and a cracked crown defeats the cap. Sweeping without addressing the crown just repeats the problem next season.
Each of these has a fix that fits the cap you already own. We tell you which one you’re looking at.
Gelco Service in Lower Moreland: What Local Conditions Mean for Your Equipment
Most of the brick and stone exterior chimneys in Lower Moreland were originally built for oil furnaces or coal fireplaces. Later, many were relined for wood stoves or converted to gas inserts. That history matters for your cap. The flue geometry changed, but the cap above it often didn’t. Then the Mid-Atlantic climate does the rest: cold, damp winters, humid summers, wet springs, and constant freeze-thaw on the masonry. A cap that no longer seals correctly lets water track down into a flue that was never designed to handle it, and in homes on the Huntingdon Valley and Bryn Athyn side of the township, that shows up as firebox staining, a summer drafty smell, or mortar coming loose at the crown. A sweep is the moment to check the seal, not just the flue.
Gelco Models & Products We Service in Lower Moreland
We service Gelco Multi-Flue Stainless Steel Chimney Caps, Gelco Custom Fabricated Chimney Caps, Gelco Single-Flue Stainless Caps, and the Universal/Legacy slip-on caps, including older galvanized models still working on township roofs. Every sweep includes a look at the cap, mesh, mounting legs and the crown beneath it. When a part needs replacing, we choose quality parts that fit your specific chimney: OEM Gelco components when you want an exact replacement, and quality aftermarket stainless caps and mesh when sizing or corrosion resistance matters more than brand matching. Either way, the part is matched to the flue you actually have, not the flue the cap was bought for.
Gelco Service Pricing in Lower Moreland
Pricing here runs by estimate, set per job. A yearly sweep on a Gelco-capped chimney is a modest call; cap re-mesh or re-mounting sits between a sweep and a replacement; a properly sized replacement cap or a crown repair adds more. We don’t quote from a script, because the number depends on the flue, the crown and how the current cap was installed. The written estimate sets the final price, and the estimate is free.
Our technicians have up to 8 years of experience with Gelco caps on Lower Moreland roofs, and that experience is why we can usually tell you in one visit whether a re-mesh will do or a replacement is the honest answer. Call (855) 528-0951 for an exact quote. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterServing Lower Moreland, PA – Our Local Coverage Area
We serve Lower Moreland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Lower Moreland
Usually yes, if the cap is sound and fits the new liner’s footprint. After a HeatShield or stainless reline, we check that the cap still seats over the flue without gaps. Many Gelco caps can be re-used with an adapter or a re-sized mounting; only structurally compromised or badly undersized caps need replacing.
Because the caps sit on exterior masonry chimneys that take repeated freeze-thaw and wet springs, and because the mounting screws work into crowns that soften over time. The cap is only as tight as the brick under it. When the crown cracks, the cap loosens. Addressing both together is what makes it last.
Yes. The cap needs to match the converted flue’s size and include proper mesh. We size the cap to the flue you have now, not the one the house was built with. Call (855) 528-0951 for an exact quote. Estimates are free.
For an irregular stone chimney, a custom-fabricated cap often fits better than a stock one and seals more reliably. Whether it’s worth it depends on the chimney’s shape and condition. We measure and show you the difference before you decide.
A sweep, an inspection of the cap, crown and flue, then either re-mounting, re-meshing or replacing the cap, plus crown repair if needed. A typical job here goes like this: a homeowner notices staining or a summer smell and calls for an annual sweep; the Gelco mesh has corroded and the legs have pulled loose from a cracked crown, letting rain into a repurposed clay-tile flue. The pro re-secures or replaces the cap, addresses the crown, and advises on waterproofing so the flue stays dry through the next freeze-thaw cycle. Call (855) 528-0951 for an exact quote. Estimates are free.
Service Areas Near Lower Moreland
We also serve homeowners in Somerton, Bustleton, Woodbourne, Warwick and Richboro. Same approach everywhere: inspect the cap and crown alongside the sweep, explain what we found, and do the repair in-house so you’re not calling a second contractor.
Book Your Gelco Service in Lower Moreland Today
If your cap is loose, the mesh is shot, or it’s simply been a few seasons since a sweep, call (855) 528-0951. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, and we’ll tell you plainly what needs doing now and what can wait.
Related Gelco Resources
Learn more about our work with Gelco caps across the region, or read about our full range of chimney services in Lower Moreland.
Written by the team at Chimney Sweep Somerton.