Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Richboro?
Chimney cleaning in Richboro typically costs $175 to $350 for a standard sweep of a wood-burning fireplace, and $250 to $450 when a gas appliance or a stubborn creosote load is involved. A Level 2 inspection, which many home sales and insurance reviews require, runs about $95 to $200 on its own or $75 to $150 when bundled with the sweep. Those numbers hold for most homes around Richboro, though a chimney that hasn’t been touched in years will land at the top of the range or above it once we see what’s inside the flue.
The estimate is free, and the written estimate sets the final price. Call Chimney Sweep Somerton at (855) 528-0951 to get one. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A standard wood-burning sweep in Richboro usually lands between $175 and $350.
- Gas fireplace cleaning runs $250 to $450 because the appliance needs to be opened up and the venting checked separately.
- Heavy third-degree creosote, a blocked flue, or a chimney no one has swept in a decade pushes the job to $400 to $650.
- Chimney cap and crown work is priced separately, usually $250 to $650 depending on the style and material.
- Stainless liner installation, when the sweep turns up a cracked or deteriorated flue, runs $2,400 to $5,500.
- Free estimates, and the written estimate is what you pay.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the line items break down for a Richboro job. Prices are typical for this market and assume a single flue. Multi-flue chimneys multiply the sweep line by the number of flues actually in use.
| Service | Typical Price Range |
|---|---|
| Standard sweep, wood-burning fireplace | $175 – $350 |
| Gas fireplace or gas insert cleaning | $250 – $450 |
| Heavy creosote removal (third-degree glazed) | $400 – $650 |
| Level 1 visual inspection | $75 – $125 |
| Level 2 camera inspection | $150 – $250 |
| Sweep + Level 2 bundle | $250 – $500 |
| Chimney cap installation (Gelco or Famco) | $250 – $550 |
| Crown repair or rebuild | $450 – $1,400 |
| Firebox repointing or repair | $500 – $1,800 |
| Stainless liner installation (DuraFlex) | $2,400 – $5,500 |
| HeatShield flue restoration | $1,400 – $3,200 |
| Full chimney rebuild above roofline | $6,000 – $15,000+ |
What drives the price up or down? Mostly creosote volume and access. A lightly used fireplace with dry, seasoned wood and an annual sweep history comes apart in under an hour. A chimney that has seen two winters of unseasoned wood, with a cap that was never installed and rain running down the flue, takes longer, and the technician has to work through layers of glazed creosote that don’t come off with standard brushing. Roof pitch and chimney height matter too, since a tall chimney on a steep roof needs more setup. So does whether the fireplace has ever been swept. First-time cleanings on older Richboro homes are the ones that surprise people.
What Affects Chimney Cleaning Pricing in Richboro
Richboro sits in Bucks County, and the housing stock here shapes what a chimney job looks like. Many homes in the area were built between the 1960s and the 1990s, with the original masonry chimneys still in place. Those chimneys have had decades of freeze-thaw cycles through the mortar joints and the crown. When we open one up, we’re usually looking at a sweep and a repair conversation at the same time. Here’s what moves the price.
- Creosote stage. Stage 1 is soot and flaky residue, and it brushes out easily. Stage 2 is tar-like and takes more time. Stage 3 is glazed, hard, and needs chemical treatment or rotary tools before it comes off. Each stage adds labor, and stage 3 can double the sweep line on its own.
- Whether a cap is in place. A missing cap means rain, snow, birds, and squirrels have been getting in for years. That often means the flue has pitting, rust on the damper, and a debris pile at the smoke shelf. We install Gelco and Famco caps, and the cap work is handled alongside the sweep rather than by a separate contractor.
- Crown condition. The concrete crown at the top of the chimney is the part that keeps water out of the brick. In Richboro’s freeze-thaw winters, a cracked crown lets water in, and water freezes and splits the brick from the inside. Crown repair is priced on its own, but it’s not optional if the sweep finds water damage below it.
- Flue interior condition. A cracked clay tile liner means the sweep needs to be part of a bigger conversation. We can inspect with a camera, and if the tiles are spalled we talk through HeatShield restoration versus a new DuraFlex stainless liner. HeatShield lets us restore the interior of the flue without tearing the chimney down, which is a real cost saving when the exterior masonry is sound.
- Offset or complex flue geometry. Some chimneys have a jog or offset between the firebox and the top. Rigid liners won’t fit those. DuraFlex flexible stainless liner handles offsets, so we can line a chimney that a rigid-only crew would turn down.
- Number of flues in use. A single-flue chimney is one sweep price. A chimney with the fireplace on one flue and the furnace or water heater on another is two, and each flue gets swept and inspected separately.
When the Sweep Turns Into a Repair: Liner and Rebuild Pricing
Most sweeps end with a clean flue and a note about what to watch. Some end with a finding that needs attention before the fireplace is used again. Here’s what those look like, priced.
A cracked or deteriorated clay tile liner is the most common finding. If the tiles are still mostly intact and the cracks are hairline, HeatShield is usually the fit. It’s a repair mortar applied to the flue interior that seals cracks and smooths the surface, and it runs roughly $1,400 to $3,200 depending on flue height and condition. If the tiles are badly spalled or missing, a stainless liner is the answer. DuraFlex flexible stainless steel liner installations in this market run $2,400 to $5,500, including the insulated wrap, top plate, and cap.
When the masonry itself is failing above the roofline, the price steps up. Chimney rebuilds above the roofline run $6,000 to $15,000+, depending on how many courses of brick need to come down and how much of the interior flue needs relining at the same time. Those are big numbers, and they’re why we spend the time to be specific about what we found and why it matters before recommending one. A chimney that’s rebuilding from the roof up is not something anyone wants to hear on a whim. It should come with photos, a camera inspection, and a plain explanation of what happens if you wait.
The fireplace itself is a separate system, and we handle that too. Firebox repair and repointing run $500 to $1,800. Damper replacement, refractory panel replacement, and firebox cleanup are all part of the scope: the same visit that sweeps the flue can repair the firebox. That’s the benefit of one crew instead of two. A sweep-only company finds the cracked firebox and then tells you to call someone else. We do the sweep, we do the cap and crown, we do the liner and rebuild, and we do the fireplace repair. One call, one crew, one written scope.
How to Save on Chimney Cleaning
The single biggest lever on chimney cleaning cost is whether the job is a routine sweep or a recovery. A sweep caught early stays in the low end of the range. A chimney that’s gone four or five years without attention usually comes with creosote, water damage, or a failed crown that adds hundreds to the visit. Here’s what actually helps.
- Burn seasoned wood. Firewood that’s been split and dried for a full year burns hotter and cleaner, and it produces less creosote. Wet wood is the single largest reason a sweep turns into a heavy removal job.
- Get the cap on. A correctly sized Gelco or Famco cap keeps rain and animals out and protects the flue between cleanings. It’s a modest add to the visit and it prevents the larger repairs.
- Don’t skip the annual sweep. One sweep a year is cheaper than one sweep every four years, because the job stays small. Chimneys don’t age in a straight line; a missed year or two compounds.
- Ask for a camera inspection once. A Level 2 camera inspection costs $150 to $250 and tells you what the flue actually looks like. It’s cheaper to know than to guess, and it makes the sweep-and-repair decision straightforward.
- Bundle the work. Sweep, cap, and crown repair in one visit keeps the labor bill in one place. Ask about it during the estimate.
- Ask for the estimate in writing. The estimate is free and it sets the price. Get the scope in writing before the work starts.
Call (855) 528-0951. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
What Happens When You Call
When you call us in Richboro, the first thing we ask is what kind of fireplace or appliance is connected to the chimney, whether it’s wood-burning or gas, and when it was last cleaned. Those three answers tell us whether we’re scheduling a standard sweep or a sweep with a camera inspection. The visit starts with a look at the firebox, the damper, the smoke shelf, and the flue from the bottom. Then we go up top to check the cap, the crown, and the brick from the roof side. Only after both views do we talk about what we found and what it means.
The sweep itself uses drop cloths and a HEPA vacuum so the room stays clean. We bring professional-grade equipment, not the shop-vac-and-brush setup. Our technicians have up to 8 years of experience, and they work with the same materials used by commercial and specialty chimney contractors: DuraFlex for flexible stainless relining, HeatShield for flue restoration, Gelco and Famco for caps, Olympia Chimney and Copperfield for liner components. Those are trade-level products, and they’re the reason we can do the full scope instead of handing off the repair to someone else.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Richboro?
A standard wood-burning chimney sweep in Richboro runs $175 to $350. Gas fireplace cleaning runs $250 to $450. Heavy creosote removal or a flue that hasn’t been cleaned in years runs $400 to $650. Call (855) 528-0951 for an exact quote; estimates are free.
Do I really need a chimney sweep every year?
Yes, for a wood-burning fireplace that sees regular use, once a year is the standard. Annual sweeps keep the creosote load small, which keeps the price at the low end of the range. A chimney that goes several years without attention usually comes back with a $400 to $650 bill instead of a $175 to $350 one. Call (855) 528-0951 to get on the schedule.
Is it cheaper to clean the chimney or reline it?
Cleaning is much cheaper, at $175 to $350 versus $2,400 to $5,500 for a stainless liner. But if the flue tiles are cracked or missing, cleaning alone doesn’t make the chimney safe to use, and a liner or HeatShield restoration is what closes the gap. A $150 to $250 camera inspection tells you which situation you’re in before you commit. Call (855) 528-0951 and we’ll walk through both options.
Can you come out the same day?
Often, yes. We dispatch crews from 7am to 7pm, Sunday through Friday, and same-day slots are common when you call early. Call (855) 528-0951. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Why is my chimney cleaning quote higher than a neighbor’s?
Because the two chimneys aren’t in the same condition. Crew size, creosote stage, flue height, roof pitch, cap condition, and whether a camera inspection is included all move the number. A chimney with third-degree creosote and a missing cap costs more to clean than a well-maintained one, and it should. The written estimate spells out the scope so you can compare like for like. Call (855) 528-0951 for yours; estimates are free.
Does chimney cleaning include the cap and crown?
No. The sweep covers the flue interior and firebox cleaning; cap and crown work is priced separately. Cap installation runs $250 to $550, and crown repair runs $450 to $1,400. We handle both in the same visit so you don’t need a second contractor. Call (855) 528-0951 to bundle the estimate.
Why Full-Scope Matters on a Chimney Job
The problem with a sweep-only visit is that it stops at the finding. A technician cleans the flue, notes a cracked crown or a spalled liner, and hands you a phone number for someone else. Then you’re waiting on a second estimate and hoping the scope matches. We handle the whole chimney – sweep, cap and crown, liner and rebuild, and fireplace repair – so the sweep and the fix come from the same crew with the same diagnosis. Your flue is a system, and we treat it like one.
If you’ve got a fireplace you haven’t used in a while, or you’ve just moved into a Richboro home with a chimney you’ve never had looked at, start with a sweep and inspection. The price is clear, the findings are specific, and the repair scope is available from the same company that found it.
Call (855) 528-0951 for a free estimate on chimney cleaning in Richboro. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Richboro market as of 2026. Chimney Sweep Somerton offers free estimates – call (855) 528-0951.
Written by the team at Chimney Sweep Somerton.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Lisa Rhodes"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jodi Ziegler"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Rana Saleh