Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Somerton Homeowners Choose Gelco Chimney Cleaning
We provide independent Gelco chimney cleaning service in Somerton, and we do it with a working knowledge of how Gelco components actually age: flex liner joints, multi-flue caps, and top-mount damper gaskets that fail in very particular ways. We’re not tied to Gelco, and we’re not authorized by them. We’re an independent provider who services Gelco chimneys and everything around them. That means we have no reason to tell you a liner is finished when the real problem is at the cap flange.
Somerton homes built between the 1950s and 1970s carry original masonry fireplaces, and decades of wood burning plus a thick oak and maple canopy have left many of these chimneys with the same recurring issues. We handle the whole chimney, not just the sweep: cleaning, cap and crown work, liner service, and fireplace repair. One call, one team. Reach us at (855) 528-0951. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Trust Chimney Sweep Somerton for Your Gelco Chimney Cleaning?
Gelco Stainless Flex Liner kits, Multi-Flue Caps, and Top-Mount Damper assemblies each have quirks that only surface after you’ve worked on enough of them. A flex liner that kinks at an offset bend doesn’t always show a visible crack from below. A top-mount gasket that has hardened can look intact while leaking cold air all winter. Our technicians have up to 8 years of experience reading those signs.
We use quality parts that fit Gelco equipment. That’s not the same as stocking OEM parts, and we won’t pretend otherwise. For load-bearing and weather-exposed pieces like liners and caps, we recommend genuine Gelco components because the temperature and corrosion ratings matter. For gaskets and fasteners, high-quality aftermarket parts that meet the same ratings work fine. What we don’t do is cut corners on a part that carries your chimney’s safety.
Warranty-safe service matters too. We work in a way that respects your Gelco installation: we don’t modify components in a way that would void a manufacturer’s coverage, and we document what we find so you have a record. If a connection point is the issue, we look there before we recommend replacing a liner that’s still sound.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Fix in Somerton
These are the Gelco problems we see most often in Somerton, and why they happen:
- Flex liner joints that separate or kink at offset bends. Stainless flex liner runs through an offset in the chimney and can lose its seal or kink at that bend over years of heating and cooling. The result is smoke rollback: smoke drifts back into the room on start-up instead of drafting up the flue. It’s often a joint problem, not a blocked chimney.
- Multi-flue caps that lift or corrode at the screw flanges. Somerton’s freeze-thaw cycles work on stainless fasteners and the flange they seat into. Fasteners back out, the cap lifts, and water and debris get into flues below. Rust at the flange is a sign the cap has been holding moisture.
- Top-mount damper gaskets that harden and lose their seal. A top-mount damper relies on its gasket to close the flue when the fireplace is off. That gasket hardens with heat cycling, and once it breaks its seal, cold air and moisture come straight down the flue when the damper is shut.
- Liner-to-appliance adapters that loosen or crack at the insert collar. A Gelco fireplace insert connects to its liner through an adapter, and that connection loosens or cracks with movement and heat. You’ll see creosote staining around the firebox and notice poor draft right where the insert meets the masonry.
- Debris-packed flues under clogged caps in fall. Somerton’s dense canopy of old oaks and maples drops leaves and acorn debris every fall, and a partially blocked Gelco multi-flue cap passes that material down. It’s not uncommon to pull a nest or a live squirrel out of a flue during an October cleaning.
Most of these look like a blocked flue from the ground. They’re usually not.
Gelco Parts & Our Repair-vs-Replace Approach
Here’s how we decide. If a Gelco flex liner is kinked beyond the section that can be swept safely, or a cap flange is rusted through, replacement is the honest call. Repair only makes sense when the liner itself is sound and the problem lives at the connection, the adapter, or the cap. We run a camera to confirm the liner’s actual condition before we recommend anything, so you’re not paying for a liner you don’t need.
On materials: genuine Gelco liners and caps earn their premium on load-bearing and weather-exposed parts. Gaskets and fasteners can be high-quality aftermarket if they meet the temperature ratings. We don’t stock OEM or genuine Gelco parts, and we’re not a Gelco dealer. We install quality parts that fit and document what we used.
Call (855) 528-0951 for an exact quote. Estimates are free, and we tell you plainly when repair is the smarter spend.
Our Gelco Service Process – Step by Step
- 1
Diagnosis. We start by asking what you’ve noticed: smoke rollback, draft problems, a cap that rattles. Then we inspect the liner joints, the cap flanges, and the adapter at the insert.
- 2
Camera inspection. A camera run through the flue confirms whether a Gelco flex liner is kinked, jointed, or separated, and separates a real liner failure from a blockoff-plate or cap issue.
- 3
Repair or install. Depending on findings, we re-seat or replace a multi-flue cap with proper stainless fasteners, reseal a top-mount damper gasket, or address a cracked adapter. If a liner is beyond repair, we explain the replacement scope before touching anything.
- 4
Test. We check draft with the appliance running, confirm the damper seals closed, and verify the cap sits level and secure.
- 5
Warranty-safe documentation. You get a record of what was found and what was done, in a form that respects your Gelco installation’s coverage.
See the difference
Before
After
Before
After
Before
AfterGelco Products We Service & Install in Somerton
We service and install the Gelco components that make up a chimney system: Gelco Stainless Flex Liners in insulated and uninsulated kits for relining a flue through offsets and complex runs; Gelco Multi-Flue Caps in standard and custom sizes to cover multiple flues on one stack; Gelco Top-Mount Damper assemblies that close the flue from the top; and the liner connections and adapters that tie a Gelco fireplace insert to its flue. Each of these is a system part that depends on the others, which is why we treat the flue as a whole. A loose cap, a stale gasket, and a kinked liner all affect how the fireplace drafts.
We Also Service These Brands
Gelco isn’t the only system we work on. We service and install DuraFlex flexible stainless liner systems for complex flues, and we work with HeatShield to restore deteriorating flue interiors without full demolition. That range matters when a Somerton chimney has mixed components or when a repair crosses brands. One team handles it.
FAQs – Gelco Chimney Cleaning Service in Somerton
No. We are an independent Gelco service provider, not authorized, certified, or affiliated with Gelco. We work on Gelco chimneys and components because we know how they fail, not because Gelco endorses us. You can call us with full confidence that our recommendations come from what we find in your flue, not from a manufacturer relationship.
Yes. We install quality parts that fit Gelco equipment, including genuine Gelco liners and caps for load-bearing and weather-exposed positions, and high-quality aftermarket gaskets and fasteners that meet the required temperature ratings. We don’t stock OEM or genuine Gelco parts, and we’re not a dealer. We match the part to the job and to the ratings that matter.
An annual sweep on a Gelco-equipped chimney usually takes about an hour to an hour and a half, depending on flue condition and how much debris has collected under a clogged cap. A cap re-seat or gasket replacement is typically a same-visit job if we’ve inspected beforehand. A liner replacement is a longer scope we’ll lay out in the written estimate, with a clear timeline. Call (855) 528-0951 for an exact quote.
We cover Gelco Stainless Flex Liner kits, Gelco Multi-Flue Caps, Gelco Top-Mount Damper assemblies, and the liner connections and adapters that serve Gelco fireplace inserts. If your Gelco component isn’t one of those, call and describe it; we’ll tell you straight whether it’s something we handle or whether you need a different specialist.
Proper service should not void your Gelco warranty, and we work in a way that respects the installation’s coverage. We use parts that meet the ratings and don’t modify components in ways that would breach manufacturer terms. We document what we find and do, so you have a record if a warranty question ever comes up. When in doubt, we can walk you through what a given scope means for coverage.
A standard Gelco chimney sweep in Somerton typically runs in the range most homeowners expect for an annual cleaning, and the written estimate sets the final price. If we find a cap or gasket issue, we quote that separately before any work. Nothing is recommended without camera evidence you can see for yourself, and we’ll say plainly when something can safely wait. Call (855) 528-0951 for an exact quote. Estimates are free.
In most cases a loose Gelco multi-flue cap can be fixed rather than replaced. Fasteners back out under freeze-thaw cycling, which lets the cap lift and rattle. If the flange is still sound, re-seating with proper stainless fasteners and sealing the crown and flashing is the fix. If the flange is rusted through, replacement is the honest call, and we’ll show you the corrosion so you can see the difference.
A sweep is the answer when creosote has built up and drafting has slowed; a damaged liner shows different signs, like smoke rollback on start-up, creosote staining at a joint or adapter, or a kink visible on camera at an offset. We run a camera to tell the two apart before recommending anything. That’s how you avoid paying for a liner when you only needed a sweep.
Yes. A Gelco top-mount damper sits at the top of the flue and closes from above, so its gasket is exposed to weather and temperature swings in a way a throat damper never is. We inspect the gasket for hardening, check that the assembly seals when closed, and confirm the linkage operates smoothly. A throat damper is lower and mostly protected, so its wear pattern is different.
Creosote builds faster when the fire burns cool and smolders: wet wood, restricted draft, or a flue that isn’t drafting well because of a kinked joint or a partially blocked cap. A Gelco liner itself doesn’t cause creosote, but a joint separation or a clogged cap can reduce draft and let creosote accumulate faster than normal. That’s why we check draft as part of every sweep.
Sometimes, but it depends on the liner’s ratings and the insert’s approval. A liner rated for wood service isn’t automatically rated for a gas insert, and the reverse applies too. Before any conversion, we check the liner and the appliance specs against the new fuel type. We’ll tell you honestly whether your existing Gelco liner can carry the change or needs replacement.
Book Your Gelco Service in Somerton, PA
If your Gelco chimney is due for a sweep or you’ve noticed smoke rollback, a rattling cap, or a damper that won’t seal, we can help. We treat the flue as a system and give you a straight answer about what’s wrong and what can wait. Call (855) 528-0951 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Somerton.